Detectors

SCD-13
SCD-15
        

Knowledge Base

FAQs
Glossary Of Terms
References
EU Directive
Part No. Designation
All Drawings
        

Technical Notes

Accessories
Arrays
Bias
Components
Dark Resistance
Detectivity
Effective Area/Size
Field of View
Frequency Response
IR Detector Selection
Linearity
Multi-color Detectors
Operating Temp
Package
Response Speed
Responsivity
Spectral Response
TE Cooling
Test Bias Circuit
        

New Products

LMA-15S
MCD
IDA
PIRE +
    
Print This Page

AP Series - Uncooled SCD-13 Detectors


Ambient Temperature: +23°C
Detector Operating Temperature +23°C
Detectors tested using 50 V/mm across the detector and a one Megohm load resistor in series. (except AP-1x3, AP-1x5, and AP-2x5 use 0.5 megohm load resistor.)
Standard Specifications - Electrical
  Minimum Typical Maximum Units
Wavelength of Max. Response 2.2 2.4 µm
D*(500K, 650 Hz, 1Hz) 7.5 x 108 9.4 x 108   cm Hz1/2 w-1
D*( lpk, 650 Hz, 1 Hz) 8.0 x 1010 1.0 x 1011   cm Hz1/2 w-1
Element Resistance (Dark) 0.5 1.0 2.0 Megohms/PbS Uncooled
Time Constant (not measured)   200 400 µsec
Rated Element Temperature     +65 °C

When using the table below, remove parenthesis and insert appropriate designation for package type in this space: Example: 3 for TO-3, 5 for TO-5, 8 for TO-8.

Model
Number
Element Size
(mm)
Responsivity
(lpk, 650) vw-1
Standard Package
Options
Minimum Typical
AP-1( ) 1 x 1 5.3 x 105 8.0 x 105 TO-5, TO-8
AP-1 x 3( ) 1 x 3 2.1 x 105 3.1 x 105 TO-5, TO-8
AP-1 x 5( ) 1 x 5 1.2 x 105 1.8 x 105 TO-5, TO-8
AP-2( ) 2 x 2 2.7 x 105 4.0 x 105 TO-5, TO-8
AP-2 x 5( ) 2 x 5 0.8 x 105 1.2 x 105 TO-5, TO-8
AP-3( ) 3 x 3 1.7 x 105 2.6 x 105 TO-5, TO-8
AP-48 4 x 4 1.3 x 105 2.0 x 105 TO-8
AP-58* 5 x 5 1.1 x 105 1.6 x 105 TO-8
AP-68* 6 x 6 9.0 x 104 1.4 x 105 TO-8
AP-103** 10 x 10 5.0 x 104 7.5 x 104 TO-3
* Minimum D*(lpk, 650, 1) >7.0 x 1010 cm Hz1/2 w-1
**
Minimum D*(lpk, 650, 1) >6.0 x 1010 cm Hz1/2 w-1